Rust Remover

Solutions > Transport > Rust Remover >

OVERVIEW

Rust Remover is an acid based concentrated cleaning preparation that has been formulated for the pre-treatment of rusty, ferrous based components.

The chemical while acting as a rust remover also provides a corrosion protection film

MAIN FEATURES

Rust Remover is a formulation containing an organic acid, tensio-active ingredients and corrosion inhibitors to remove rust and dirt while providing a surface that will reduce further rusting potential.

TECHNICAL BENEFITS

  • Rust Remover can be used in a variety of concentrations from 1% to 10%.
  • Parts to be cleaned can be in contact with the cleaning chemical from 1 hour to 24 hours, depending on the application method and the working time required to remove the rust and other contaminants.

APPLICATION INFORMATION

Remove all loose particles with a wire brush or by wiping vigorously with a cloth.

Application can be by immersion or manually applying with a brush to the affected areas.

Working time depends on the application method and the dilution used.

Let the object dry normally in the open air after treatment – pressure wash off with water however if the object is to be painted or coated.

PRECAUTIONS

Always refer to the appropriate MSDS before handling or use.

It is recommended that the surfaces to be cleaned or treated should initially be tested with a small amount of the selected chemical in a non-critical area, to determine if any adverse reaction takes place.

Avoid skin contact and wear chemical proof gloves.




HS-Code : 34021200

Packaging :
  • 5 Ltrs
  • 10 Ltrs
  • 25 Ltrs
  • 210 Ltrs
  • 1000 Ltrs

It is recommended that the surface to be cleaned or treated should initially be tested with a small amount of the selected chemical in a non-critical area, to determine if any adverse reaction takes place.

WVT Industries is a specialist chemical manufacturer and any directions for the use and application of its chemicals are provided in good faith. This information is based on experience and research but is not intended to be a definitive statement for the use of the chemical or to be taken as complete process advice. While the company, its management and employees will share what knowledge they have and make recommendations, this information can never give rise to liability or consequential damage from third parties. Any information provided regarding the chemical does not exempt the customer from examining the product and its directions for use to determine the suitability themselves for its intended purpose.