Foam Cleaner 130

Solutions > Oil & Gas > Foam Cleaner 130 >

OVERVIEW

Foam Cleaner 130 is a concentrated, liquid cleaning product containing a high percentage of active ingredients.

It is designed specifically for the cleaning and degreasing of air coolers and fin fans on heat exchangers to improve heat transfer.

MAIN FEATURES

  • The foaming characteristics of Foam Cleaner 130 when applied under low pressure with a foam lance, allow the chemical to penetrate slowly for optimum cleaning performance.
  • The chemical formulation is completely biodegradable.

TECHNICAL BENEFITS

  • Foam Cleaner 130 is non-toxic, non-flammable and does not affect the performance of oil-water separators.
  • The chemical is safe to use on a wide variety of metals and has no affect on Aluminium or other non-ferrous materials.

APPLICATION INFORMATION

Foam Cleaner 130 is able to be diluted to between 5% and 10% of concentrate with water, depending on the level and type of contamination, the cleaning method and the temperature of the solution being applied.

The ideal application temperature is between 60 and 80 degrees centigrade.

After the foam application, allow the chemical to work for 5 to 10 minutes before rinsing with large amounts of high-pressure water.

PRECAUTIONS

It is recommended that the surfaces to be cleaned or treated should initially be tested with a small amount of the selected chemical in a non-critical area, to determine if any adverse reaction takes place.

SAFETY

Refer appropriate MSDS before handling and use.


HS-Code : 34021200

Packaging :
  • 5 Ltrs
  • 10 Ltrs
  • 25 Ltrs
  • 210 Ltrs
  • 1000 Ltrs

It is recommended that the surface to be cleaned or treated should initially be tested with a small amount of the selected chemical in a non-critical area, to determine if any adverse reaction takes place.

WVT Industries is a specialist chemical manufacturer and any directions for the use and application of its chemicals are provided in good faith. This information is based on experience and research but is not intended to be a definitive statement for the use of the chemical or to be taken as complete process advice. While the company, its management and employees will share what knowledge they have and make recommendations, this information can never give rise to liability or consequential damage from third parties. Any information provided regarding the chemical does not exempt the customer from examining the product and its directions for use to determine the suitability themselves for its intended purpose.